NETGEAR Network Card WGX102 User Manual

First, Connect the XE102 WallꢀPlugged Ethernet Bridge  
a. Use the Ethernet cable that shipped with the product to connect the XE102  
Wall-Plugged Ethernet bridge to a LAN port on your router.  
Test Your Network Connectivity  
Check to make sure you are able to browse the Internet with each wireless computer  
on the network.  
1
4
Installation Guide  
54 Mbps Wall-Plugged Wireless Range Extender WGX102  
b. Plug the XE102 into an electrical outlet near the router.  
Note: Wireless security is disabled by default on the WGX102. For information  
about configuring the WGX102 to use security settings, see the Reference Manual on  
the Resource CD.  
Start Here  
Wall-Plugged Ethernet  
Bridge XE102  
Troubleshooting Tips  
Here are some tips for correcting simple problems that prevent you from connecting to the  
Internet or connecting to the WGX102.  
Before proceeding with installation, familiarize yourself with the contents of the product  
package, especially the WGX102 Reference Manual on the Resource CD.  
Each computer that will use the Wall-Plugged Wireless Range Extender WGX102  
must have a wireless card installed and configured.  
Network settings must be correct.  
The wireless Network Name (SSID), channel, and WEP settings of the range extender  
and wireless computers must match exactly. LAN and wirelessly connected computers  
must be configured to obtain an IP address automatically via DHCP. For instructions  
on how to do this, please see the animated tutorials on the Resource CD.  
For Cable Modem Service: When you perform the range extender setup steps, be sure  
to use the computer you used when you first set up your cable Internet connection.  
Router  
For DSL Service: You may need information such as the DSL login name/e-mail  
address and password in order to complete the wireless range extender setup.  
Check the Power light on the WGX102 and XE102 Bridge.  
If the Power light is off, make sure power is supplied to the electrical outlet, and the  
wall-plugged equipment is not plugged into an extension cord, power strip, or surge  
protector.  
Power LAN  
Ports  
Internet  
Observe the wireless placement and range guidelines in the Reference Manual.  
Note: The WGX102 is designed for easy installation in access point mode, and can be  
used with multiple XE102 Wall-Plugged Ethernet Bridges in this mode. Use the quick  
installation instructions here to install the WGX102 in access point mode.  
c. Shut down and restart your wireless computer.  
Check the HomePlug light on the WGX102 and XE102 Bridge.  
If this light is off, the devices cannot find each other. Make sure the WGX102 and  
the XE102 Bridge are plugged into outlets with power and that the Ethernet  
connection to the bridge is secure.  
Plug the WGX102 into a Wall Outlet  
Plug the WGX102 into an electrical outlet near the wireless computer that you want  
to connect, and wait one minute. All three LEDS on the WGX102 will light up.  
2
3
Quick Installation  
Follow these instructions if your broadband Internet connection already uses a router, and  
you want to add wireless access.  
For more help with troubleshooting, see the Reference Manual on the Resource CD.  
WARNING: Do not connect the WGX102 Wall-Plugged Wireless Range Extender or  
the XE102 Wall-Plugged Ethernet Bridge to a power strip, extension cord, or surge pro-  
tector as this may prevent them from working properly or degrade the network perform-  
ance.  
Rooom 2  
WGX102  
Wireless  
Notebook  
PC  
PC  
Now, Configure Your Wireless Computer  
Set the SSID to NETGEAR for any wireless computers on the network. You may  
connect additional XE102 bridges to your network. This completes the installation.  
 

Moyer Diebel Dishwasher MD18 1 User Manual
Nagra MP3 Player Ares M User Manual
Napco Security Technologies Computer Hardware GEM RS232 User Manual
NEC Projector MT1000 User Manual
Nortel Networks Network Hardware NTNM13XKAB User Manual
Omnimount Indoor Furnishings LS31 User Manual
Panasonic Digital Camera DMC FX01 User Manual
Panasonic Network Card 2SD1938F User Manual
ParaBody Home Gym 441101 440 User Manual
Patton electronic Network Card 1140ARC User Manual