NETGEAR Security Camera WNDR3700v4 User Manual

Installation Guide  
N600 Wireless Dual Band Gigabit Router  
Step 1:  
Step 2:  
WNDR3700v4  
(not included)  
Connect one end of the  
yellow Ethernet cable  
Unplug the power  
Laptop or desktop  
computer  
to turn off your modem.  
to your modem, and the  
other end to the Internet  
port on your router.  
Step 5:  
Connect your computer  
to the router ( ).  
Package Contents  
DSL  
Use another Ethernet cable to  
establish a wired connection  
as shown in this diagram.  
Internet  
Optionally, connect wirelessly  
by using the preset wireless  
security settings, located on  
the bottom label.  
Power On/Off  
Power On/Off  
Modem  
Ethernet cable  
Step 3:  
Step 6:  
N600 Wireless Router  
Plug in the power to  
turn on your modem.  
Open a browser.  
Step 4:  
If the web page does not  
display, close and re-open  
the browser, then enter  
in the address bar, or  
check the “Troubleshooting”  
section on the back of  
this installation guide.  
Connect the power adapter to the  
router, then plug it into an outlet.  
Wait approximately 2 minutes  
until your modem turns on.  
GHz  
2.4  
Wait for the 2.4 GHz LED (  
to light.  
)
If your modem has  
a battery backup,  
first remove and reinsert  
the battery before connecting  
your modem to power.  
N600 Wireless Router  
Power adapter  
If none of the LEDs light, make sure  
that the Power On/Off button is in the  
on position (pushed in).  
 

Miele Clothes Dryer T 4888 C User Manual
Miele Oven H 310 User Manual
NAD Universal Remote HTR 5 User Manual
National Instruments Vacuum Cleaner 322391A 01 User Manual
NETGEAR Home Security System AGM732F User Manual
Nokia Bluetooth Headset HS 3W User Manual
Nordyne Electric Heater Q4 Series User Manual
Oreck Vacuum Cleaner DTX 1100 User Manual
OWI Portable Speaker LGS470 User Manual
Panasonic Electric Shaver ES364 User Manual