NETGEAR Network Router WNDR4300 User Manual

Installation Guide  
N750 Wireless Dual Band Gigabit Router  
Step 1:  
Step 2:  
(not included)  
Premium Edition  
Connect one end of the  
yellow Ethernet cable  
Unplug the power  
Laptop or desktop  
computer  
WNDR4300  
to turn off your modem.  
to your modem, and the  
other end to the Internet  
port on your router.  
Step 5:  
Connect your computer  
to the router  
Package Contents:  
DSL  
or cable  
Internet  
Power On/Off  
Power On/Off  
Modem  
Ethernet cable  
Step 3:  
Step 6:  
N750 Wireless Router  
Plug in the power to  
turn on your modem.  
Open a browser.  
Step 4:  
If the web page does not  
display, close and reopen  
the browser, then enter  
in the address bar, or  
check the “Troubleshooting”  
section on the back of  
this installation guide.  
Connect the power adapter to the  
router, then plug it into an outlet.  
Wait approximately 2 minutes  
until your modem turns on.  
GHz  
2.4  
Wait for the 2.4 GHz LED (  
to light.  
)
If your modem has  
a battery backup,  
first remove and reinsert  
the battery before connecting  
your modem to power.  
Power adapter  
N750 Wireless Router  
If none of the LEDs light, make sure  
that the Power On/Off button is in the  
on position (pushed in).  
 

MTD Lawn Mower 110 017R000 User Manual
Multiquip Landscape Lighting GB3LED User Manual
Nady Systems Microphone DM 90 User Manual
Omega Engineering Thermometer HX94 User Manual
Omron Blood Pressure Monitor MC 514 User Manual
Onkyo CD Player CR 445 User Manual
Onkyo Stereo Amplifier A 1VL User Manual
Oreck Air Cleaner ProShield Plus Ai User Manual
Oregon Scientific Thermometer BBT216 User Manual
Panasonic Universal Remote AJ RC5 User Manual